• The Mentor (Kenobi)

    $349.99$449.99

    When we first saw this saber our words were “Hello there.” This hilt will complete cosplays for many eras.

    This is a thin neck saber. Thin neck sabers are well suited to the authentic look for a cosplay. And they can be used for spinning as well as light dueling. The thin neck can be a structural weakness under heavy or repeated contact. We do not recommend our thin neck sabers for dueling.

    This is one of our new replica sabers in our Saga line. Our Saga hilts all come standard equipped with the same Leveled Up electronics you’ve come to expect from all of our sabers. The saber also comes with an acrylic stand, blade plug, a saber blade, rechargeable lithium battery, a battery charger, all necessary hardware, and the customer support you’ve come to expect from the Level Up crew.

  • Saber Sheath

    $34.99

    Our tube saber sheath is an opaque durable plastic tube that accommodates a full length (or shorter) saber blade from Level Up Lightsaber. This sheath works with any Mid-Grade or Heavy Grade blade and works best with an emitter that has a flush round surface. The sheath has a round closed end cap to completely trap the light if the blade is ignited while in the sheath.

  • Night Forged Lightsaber

    $199.99$299.99

    The Night Forged was the first cross guard saber brought to the site. It has since been joined by two others over in the Better Than A Stick Game section. Friendly Neighborhood Master Alan recommends cross guard sabers or Knuckles for training younglings (ask Luke or Anakin about extra hand protection).

    Features: 

    • Heavy dueling (xenopixel not recommended for dueling)
    • Button push color change
    • Blaster deflect sound trigger
    • Lock up sound and visual effect
    • Flash on clash visual effect
    • Multiple sound fonts
    • In hilt recharge
  • The Hero (Luke With Control Box)

    $349.99$449.99

    This is a thin neck saber. Thin neck sabers are well suited to the authentic look for a cosplay. And they can be used for spinning as well as light dueling. The thin neck can be a structural weakness under heavy or repeated contact. We do not recommend our thin neck sabers for dueling.

    This is one of our new replica sabers in our Saga line. Our Saga hilts all come standard equipped with the same bright RGB LED you’ve come to expect from our training sabers. Each hilt has 9 sound fonts to choose from. Saber comes with an acrylic stand, blade plug, 36” polycarbonate blade, rechargeable lithium battery, a battery charger, all necessary hardware, and the customer support you’ve come to expect from the Level Up crew.

    Neopixel Option! For the first time Level Up Lightsaber is offering a neopixel option. The xenopixel gives you all of the best features expected of neopixel sabers. A microSD card on the board allows quick customization of blade effects and sounds, including uploading custom sound fonts. The Level Up Xenopixel comes pre-loaded with over 20 sound fonts, plus unique blade effects that only neopixel sabers can replicate, including the flame blade and the full spectrum rainbow blade. Like any neopixel, the Level Up Xenopixel is not suited for dueling, but for saber spinners and cosplayers the ability to customize is unparalleled.

    RGB Baselit Features: 

    • Heavy dueling
    • Button push color change
    • Blaster deflect sound trigger
    • Lock up sound and visual effect
    • Flash on clash visual effect
    • Multiple sound fonts
    • In hilt recharge

    Xenopixel  Features: 

    • Button push color change
    • Gesture controls
    • Blaster deflect sound trigger
    • Lock up sound and visual effect
    • Flash on clash visual effect
    • Multiple sound fonts
    • Upload Custom Sound Fonts
    • In hilt recharge
  • The Menace (Darth Maul)

    $349.99$449.99

    The Menace is two saber handles designed to connect to create an intimidating dual bladed saber. Mirrored finish with details to help complete a devilish cosplay. Now available in Black as well.

    This is one of our new replica sabers in our Saga line. Our Saga hilts all come standard equipped with the same bright RGB LED you’ve come to expect from our training sabers. Each hilt has 9 sound fonts to choose from. Saber comes with an acrylic stand, blade plug, two 36” polycarbonate blades, two rechargeable lithium batteries, a battery charger, all necessary hardware, and the customer support you’ve come to expect from the Level Up crew.

  • The Master (Anakin/Luke/Rey)

    $349.99$449.99

    This replica is modeled after the design that began the joy for many of us. It has been wielded by heroes across generations and now you can wear it on your belt.

    This is one of our new replica sabers in our Saga line. Our Saga hilts all come standard equipped with the same Leveled Up electronics you’ve come to expect from all of our sabers. The saber also comes with an acrylic stand, blade plug, a saber blade, rechargeable lithium battery, a battery charger, all necessary hardware, and the customer support you’ve come to expect from the Level Up crew.

  • Eclipse Sheath

    $49.99

    The eclipse sheath is a mix of opaque and clear plastics, plus windows cut into the sheath to allow light to show through. The sheath has an attached D-Ring swivel that works easily with our belt clip.

  • Ahsoka Clone Wars Dual Sabers

    $750.00$950.00

    The Pre-Order has concluded!

    The clone wars sabers from Ahsoka are finally here! This order is only for the saber pair. They will be available for separate purchase soon. The Ahsoka sabers feature all the options you have come to expect from Level Up Lightsaber. Orders placed after the 27th cannot be guaranteed delivery by Halloween

    Neopixel Option! For the first time Level Up Lightsaber is offering a neopixel option. The xenopixel gives you all of the best features expected of neopixel sabers. A microSD card on the board allows quick customization of blade effects and sounds, including uploading custom sound fonts. The Level Up Xenopixel comes pre-loaded with over 9 sound fonts, plus unique blade effects that only neopixel sabers can replicate, including the flame blade and the full spectrum rainbow blade. Like any neopixel, the Level Up Xenopixel is not suited for dueling, but for saber spinners and cosplayers the ability to customize is unparalleled.

    RGB Baselit Features: 

    • Heavy dueling
    • Button push color change
    • Blaster deflect sound trigger
    • Lock up sound and visual effect
    • Flash on clash visual effect
    • Multiple sound fonts
    • In hilt recharge

    Xenopixel  Features: 

    • Button push color change
    • Gesture controls
    • Blaster deflect sound trigger
    • Lock up sound and visual effect
    • Flash on clash visual effect
    • Multiple sound fonts
    • Upload Custom Sound Fonts
    • In hilt recharge
    • Upload custom blade effects
  • Knuckles

    $199.99$279.99

    Important Note: Choosing a blade length other than 28″ or 36″ can delay preparation of your order. 

    The Knuckles hilt is a unique saber with a D shaped hand guard. It’s best suited for one handed use, but you can also two hand grip. Knuckles ships with our standard tube polycarbonate blade, but it can also accommodate out flat blades and their adaptors.

    Features: 

    • Heavy dueling
    • Button push color change
    • Blaster deflect sound trigger
    • Lock up sound and visual effect
    • Flash on clash visual effect
    • Multiple sound fonts
    • In hilt recharge
  • Darksaber

    $299.99$349.99

    Ordinarily you must earn this blade in combat to become the Mand’alor. But that was a long time ago in a place far away. Now, you just have to want it. We do not recommend our Dark saber for heavy dueling, but we are very pleased with the durability of the flat blade and it’s ability to carry light and complete the look for any cosplay from Vizsla to Bo Katan to Djarin (with maybe a stop somewhere along the way for Darth Maul, Sabine Wren, or even Moff Gideon).

    Important Note: To make the Darksaber both durable and have a feel more authentic in hand changes needed to be made to the battery and electronics layout. Most Level Up sabers you can expect 4 hours or run time on a full charge. For this Darksaber it is much more common to expect 1 hour of run time from a single charge.

    Features: 

    • Light and Medium impact resilient
    • Button push color change
    • Blaster deflect sound trigger
    • Lock up sound and visual effect
    • Flash on clash visual effect
    • Multiple sound fonts
    • In hilt recharge
  • Origin

    $129.99$199.99

    In honor of Level Up Sabers attending The Origins Game Fair in Columbus Ohio we introduce The Origin saber. This marks our second saber available in Red. It is also our first in Purple, Blue, or Green. This product will be physically available at the convention. Online it will be available for pre-order until after the end of the convention. If there is any surplus inventory after the convention all pre-ordered sabers will be shipped first.

    This saber has a rounded endcap. You will need a double sided connector to connect this to another saber as a staff.

    We cannot predict which colors will be most popular at the convention. Inventory quantities will be updated after the convention. Orders placed before the convention will receive priority.

  • Luna

    $299.99$399.99

    Regularly priced at $349.99 and $449.99 this sale runs to October 13th.

    The perfect saber to complete a magical sailor cosplay or display.

    The RGB Baselit electronics allow color change and blade will display a single color at a time.

    Xenopixel electronics can display multiple colors at one time in the blade.

  • Spare Charging Cable

    $5.00

    Need a spare? Or a replacement? Whatever the reason a quick replacement will be on the way.

  • Pole Arm Adaptor

    $29.99

    Three saber components packaged together to creator an extender or pole arm adaptor. This kit is a double sided connector, an emitter from our xpBoost saber, and a 1 1/2 inch extension piece (found in our xpBoost and Bruiser handles).

    This kit is intended to be used one of two ways.

    Pole arm adaptor: to make a saber pike or other pole arm, you connect this adaptor to a 1 inch outer diameter haft. There are two holes for screws in the emitter piece and one hole in the extension piece. This allows you to affix the adaptor securely. Next you would connect your saber directly to the adaptor in order to make your pole arm. Different screws are appropriate for different haft materials so we do not provide specific screws.

    Handle extension: Any of these pieces can connect to extend a saber handle. Including connecting the entire length to the bottom of a saber to add roughly 5 inches of additional handle length.

    Compatible Sabers: xpBoost, BonusXP, Dark Shroud, Origin, Power Up, Hope, Infinity, Knuckles, Mini Menace, Bruiser, Phantom, Night Forged, and the Chamber.

  • Better Than A Brick (BTAB)

    $199.99$299.99

    The only saber from Level Up Sabers guaranteed Better Than A Brick. The BTAB is inspired from the various properties from the universe made of bricks. With all the shape and details of the Brick-verse, durable enough for dueling, and guaranteed better than a stick (or a brick).

  • The Dark Father (Vader)

    $349.99$449.99

    The perfect hilt to complete a dark shogun cosplay. You know the kind of person that would carry this, we don’t have to tell you.

    This is one of our new replica sabers in our Saga line. Our Saga hilts are all now available in base lit (RGB) or Xenopixel configurations. Our base lit sabers come standard with 9 sound fonts, color change, and basic blade effects. The LED in our base lit saber is a 12 Watt Red, Green, and Blue LED under the lens. Baselit sabers ship with a medium grade blade in your selected length. Our Xenopixel sabers come with a 50 Watt neopixel blade in the length you select. Xenopixel sabers are not recommended for dueling.

    Saga Sabers come with: an acrylic stand, a blade, blade plug, rechargeable lithium battery, a battery charger, all necessary hardware, and the customer support you’ve come to expect from the Level Up crew.