• Fulcrum Set

    $599.99$699.99

    IMPORTANT: These sabers ships with a 7/8 inch diameter blade instead of our standard 1 inch diameter blade. It helps provide a similar look to the character with the long thin blades, but it is not recommended for heavy dueling.

    The saber of our favorite Rebel Space Ronin!

    Neopixel Option! For the first time Level Up Lightsaber is offering a neopixel option. The xenopixel gives you all of the best features expected of neopixel sabers. A microSD card on the board allows quick customization of blade effects and sounds, including uploading custom sound fonts. The Level Up Xenopixel comes pre-loaded with over 20 sound fonts, plus unique blade effects that only neopixel sabers can replicate, including the flame blade and the full spectrum rainbow blade. Like any neopixel, the Level Up Xenopixel is not suited for dueling, but for saber spinners and cosplayers the ability to customize is unparalleled.

    RGB Baselit Features: 

    • Medium to Light Dueling
    • Button push color change
    • Blaster deflect sound trigger
    • Lock up sound and visual effect
    • Flash on clash visual effect
    • Multiple sound fonts
    • In hilt recharge

    Xenopixel  Features: 

    • Button push color change
    • Gesture controls
    • Blaster deflect sound trigger
    • Lock up sound and visual effect
    • Flash on clash visual effect
    • Multiple sound fonts
    • Upload Custom Sound Fonts
    • In hilt recharge
    • Upload custom blade effects
  • Jade Hand (Mara Jade Skywalker)

    $199.99$369.99

    The much requested saber for Mara Jade (eventually a Skywalker) who first appeared in the Heir to the Empire novel back in 1991. Mara Jade has been a favorite among cosplayers for as far back as when the book first published. It is exciting to finally be able to release this saber design.This character saber is offered with two different display packages. At purchase you need to select both your electronics type, but also which display package is right for you. For shelf display your saber will come with a clear acrylic stand and blade plug (also a full sized 2mm hex key), this is the ideal way to display a saber without a blade. For wall display your saber will come with a wall clip so you can display your saber blade in and lit up.

    Important Note: This saber is not waterproof

    Wall Display Package

    • Saber Handle
    • Blade
    • Wall Clip
    • Hardware and Charging Cable

    Shelf Display Package

    • Saber Handle
    • Blade
    • Hardware and Charging Cable
    • Acrylic Stand
    • Blade Plug
    • Full Size 2mm Hex Key
  • Dragon Saber

    $199.99$279.99

    The Dragon Saber is one of our special sabers released for the year of the dragon. This beautiful saber is a wonderful display piece, but also looks fantastic in cosplay and filming applications. The handle is sturday enough for training and dueling. The handle features dragon and cloud details in contrasting red and silver on the handle. With gold details to really make the pommel and emitter pop. This is a beautiful saber waiting for someone to bring it on an adventure.

  • The Antithesis (Shin Hati)

    $249.99$419.99

    The Antithesis comes to us from the antagonist student Shin Hati. At purchase you need to select both your electronics type, but also which display package is right for you. For shelf display your saber will come with a clear acrylic stand and blade plug (also a full sized 2mm hex key), this is the ideal way to display a saber without a blade. For wall display your saber will come with a wall clip so you can display your saber blade in and lit up. You can also spend a little extra to get this saber in a weathered look to reflect the lifetime of good and bad choices.

    Wall Display Package

    • Saber Handle
    • Blade
    • Wall Clip
    • Hardware and Charging Cable

    Shelf Display Package

    • Saber Handle
    • Blade
    • Hardware and Charging Cable
    • Acrylic Stand
    • Blade Plug
    • Full Size 2mm Hex Key
  • Imperial Gold

    $24.99

    This is a very special item being brought to the site for all the cast of the Better Than A Stick Table Top Game. Each cast member received one of these for the final episode of season one. A little looted space treasure to keep to celebrate the conclusion of a lot of hard work. It’s being made available to everyone now that the show has wrapped. Proceeds of every sale of this item will go to support the creators of the cast.

  • Electric Judgment

    $249.99$419.99

    Some people might say Master Plo Koon is a side character, but not to me. Level Up Sabers chose Master Plo Koon as a favored Jedi in the first episode of the animated Clone Wars TV show. For the first time a character saber is offered with different display packages. At purchase you need to select both your electronics type, but also which display package is right for you. For shelf display your saber will come with a clear acrylic stand and blade plug (also a full sized 2mm hex key), this is the ideal way to display a saber without a blade. For wall display your saber will come with a wall clip so you can display your saber blade in and lit up.

    Wall Display Package

    • Saber Handle
    • Blade
    • Wall Clip
    • Hardware and Charging Cable

    Shelf Display Package

    • Saber Handle
    • Blade
    • Hardware and Charging Cable
    • Acrylic Stand
    • Blade Plug
    • Full Size 2mm Hex Key
  • The Fallen: D-Ring

    $349.99$449.99

    Have the poncho but need a little something extra? This version of the Fallen is the one in the collection that comes with an easy method for belt carry. A beautiful piece for a collection, display, or to complete a cosplay. 

    This is one of our new replica sabers in our Saga line. Our Saga hilts all come standard equipped with the same Leveled Up electronics you’ve come to expect from all of our sabers. The saber also comes with an acrylic stand, blade plug, a saber blade, rechargeable lithium battery, a battery charger, all necessary hardware, and the customer support you’ve come to expect from the Level Up crew.

  • Sabre Flat Blade

    $99.00

    The blades are made out of a special mixed polycarbonate clear plastic. They have tremendous strength and are resilient to contact. Despite the blade durability, we do not recommend these for heavy dueling. The way that the blades connect to the adaptor and then insert into the handle is not suitably safe for a dueling environment.

    Important Note: The flat blades are compatible with: Knuckles, xpBoost, Power UpOrigin and BonusXP emitters.

  • Daito Flat Blade

    $99.00

    The blades are made out of a special mixed polycarbonate clear plastic. They have tremendous strength and are resilient to contact. Despite the blade durability, we do not recommend these for heavy dueling. The way that the blades connect to the adaptor and then insert into the handle is not suitably safe for a dueling environment.

    Important Note: The flat blades are compatible with: Knuckles, xpBoost, Power UpOrigin and BonusXP emitters.

  • Budget Pupil (Rey)

    $199.99$279.99

    A budget version of the hilt from a desert scavenger turned hero. The Saga version of this design activates with the rotation toggle. The budget version has a cog that spins, but activates from a button. This is a great option for someone that needs a more wallet friendly version of a saber to complete their cosplay. With fewer minute details, it’s also much more suited to impacts.

  • The BMF

    $349.99$449.99

    The saber of the iconic baddest master ever

    The BMF (Baddest Master Forever) is a saber to honor everyone’s favorite purple bladed saber. A detailed homage with gold details, rubber, and leather accents.

    Neopixel Option! For the first time Level Up Lightsaber is offering a neopixel option. The xenopixel gives you all of the best features expected of neopixel sabers. A microSD card on the board allows quick customization of blade effects and sounds, including uploading custom sound fonts. The Level Up Xenopixel comes pre-loaded with over 20 sound fonts, plus unique blade effects that only neopixel sabers can replicate, including the flame blade and the full spectrum rainbow blade. Like any neopixel, the Level Up Xenopixel is not suited for dueling, but for saber spinners and cosplayers the ability to customize is unparalleled.

    RGB Baselit Features: 

    • Heavy dueling
    • Button push color change
    • Blaster deflect sound trigger
    • Lock up sound and visual effect
    • Flash on clash visual effect
    • Multiple sound fonts
    • In hilt recharge

    Xenopixel  Features: 

    • Button push color change
    • Gesture controls
    • Blaster deflect sound trigger
    • Lock up sound and visual effect
    • Flash on clash visual effect
    • Multiple sound fonts
    • Upload Custom Sound Fonts
    • In hilt recharge
    • Upload custom blade effects
  • Gladius

    Original price was: $249.99.Current price is: $199.99.

    The Gladius is a unique saber for cosplay and display. A sleek black handle that mimics the design of various double edged swords. The Level Up saber core with color change and sound fonts powers all the features you need form this unique piece. The unique emitter can also accommodate any of the other flat blade designs.

    This set includes the Double Edge Flat blade with or without a crackle pattern, your choice. This saber is only available in base lit.

    We do not recommend flat blades for dueling or impacts

     

  • Sentinel (Bastila Shan)

    $199.99$299.99

    The Sentinel is a much awaited saber first seen in the Knights of the Old Republic Games. If you are unfamiliar with Bastila Shan, she is a central character alongside Revan in the KOTOR games. This double saber can be used as a staff or separated into separate sabers. A beautiful display piece or the finishing touch on a cosplay.

    Level Up Sabers does not recommend getting this saber to display on a shelf above your work areas as an incentive to stay on target and complete your cosplay. As much motivation as a waiting lightsaber can provide, Cosplay is an expensive undertaking at most times. And we would rather we were not the reason a cosplay was delayed even a month.

    This saber comes with two handles and a blade for each. If you intend to mostly use the saber separated, we recommend using longer blades. If you intend to mostly use the saber connected as a staff, we recommend shorter blades. Even with 24 inch blades, when connected the saber is already roughly 5 feet end to end.

  • Heavy Iron Saber

    $199.99$279.99

    There is an old story of the Heaven Sword and Dragon Saber. The two blades are siblings and adversaries in a way. Each is described as holding the key to overthrowing a ruler and seizing control of the world. The two mythical blades were forged from the metal of The Heavy Iron Sword.

    The Heavy Iron Saber is one of our special sabers released for the year of the dragon. This beautiful saber is a wonderful display piece, but also looks fantastic in cosplay and filming applications. The handle is sturdy enough for training and dueling. The handle features an intricate design of Red and Black with gold details.

  • Long Hard Side Saber Case

    Original price was: $89.99.Current price is: $59.99.

    This foam lined hard sided cases can safely transport your saber and blades safely when you’re on the go. The case ships with a foam divider, slots for blade plugs, and blades. The case can easily multiple sabers, hardware and blades.