Saber Accessories
-
Spare Charging Cable
$5.00Need a spare? Or a replacement? Whatever the reason a quick replacement will be on the way.
-
Covertech Wheel
$19.99 -
Belt Clip
$19.99The belt clip can accommodate a standard round belt adaptor. It also has a prong that can hold a D-Ring saber.
-
Medium Grade Blades
$29.99Our medium grade saber blades have a wall thickness of 2 mm. They are ready for impact and fully durable. Medium Grade blades have a cone tip and a cellophane insert (our blades have the plastic film insert to help carry light evenly through the blade). Whether you’d like to carry spare blades for events or you want to customize different lengths, we have blades ready to ship.
-
Pole Arm Adaptor
$29.99Three saber components packaged together to creator an extender or pole arm adaptor. This kit is a double sided connector, an emitter from our xpBoost saber, and a 1 1/2 inch extension piece (found in our xpBoost and Bruiser handles).
This kit is intended to be used one of two ways.
Pole arm adaptor: to make a saber pike or other pole arm, you connect this adaptor to a 1 inch outer diameter haft. There are two holes for screws in the emitter piece and one hole in the extension piece. This allows you to affix the adaptor securely. Next you would connect your saber directly to the adaptor in order to make your pole arm. Different screws are appropriate for different haft materials so we do not provide specific screws.
Handle extension: Any of these pieces can connect to extend a saber handle. Including connecting the entire length to the bottom of a saber to add roughly 5 inches of additional handle length.
Compatible Sabers: xpBoost, BonusXP, Dark Shroud, Origin, Power Up, Hope, Infinity, Knuckles, Mini Menace, Bruiser, Phantom, Night Forged, and the Chamber.
-
Tonfa Extension
$29.99 -
Saber Sheath
$34.99Our tube saber sheath is an opaque durable plastic tube that accommodates a full length (or shorter) saber blade from Level Up Lightsaber. This sheath works with any Mid-Grade or Heavy Grade blade and works best with an emitter that has a flush round surface. The sheath has a round closed end cap to completely trap the light if the blade is ignited while in the sheath.
-
Whip Blade
$34.99Our whip saber blade is compatible with any saber that accommodates a 1 inch outer diameter blade. They are ready for impacts and fully durable. With Whip Sabers established in canon in the High Republic Novels, this could complete your Vernestra cosplay (or your OC).
-
Heavy Grade Blade
$39.99Our heavy grade saber blades have a wall thickness of 3 mm. They are ready for impact and fully durable. Heavy Grade blades have a rounded tip and a cellophane insert (our blades have the plastic film insert to help carry light evenly through the blade). An extra feature to our heavy grade blades, the tip screws into the blade itself for extra strength. Whether you’d like to carry spare blades for events or you want to customize different lengths, we have blades ready to ship.
-
Hard Sided Saber Case
$49.99This foam lined hard sided cases can safely transport your saber safely when you’re on the go. The case ships with a foam divider and slot for blade plugs. The case can easily accommodate four Training Tier sabers or two Saga Tier Sabers.
-
Neopixel Blade
$84.99We do not recommend our neopixel blades or sabers for full contact dueling
Spare blades can be handy. Whether you like to swap between blade lengths for different cosplays or for different training applications. If you’re at a competition, breaks happen, it’s nice to have backups. If you like to swap between double and single bladed sabers it’s much more budget friendly to keep spare blades than to have to purchase multiple extra sabers (although, we are not going to complain if you would rather get separate sabers for specific applications).
While our mid grade and heavy grade blades are easy to customize at home, changing the length of a neopixel blade is very difficult. We offer several length options in our neopixel blades.
Expect 4 to 6 weeks delivery for products on backorder.
-
Flat Blade Crackle
$99.00With the excitement around Star Wars Visions and the anticipated problems around international shipping towards the end of the year, we are offering a very special pre-order for our new flat blades. This order will be just the blades with crackle details on the flat of the blade. The crackle allows extra light to come through to give special contrast along the body of the blade.
The blades are made out of a special mixed polycarbonate clear plastic. They have tremendous strength and are resilient to contact. Despite the blade durability, we do not recommend these for heavy dueling. The way that the blades connect to the adaptor and then insert into the handle is not suitably safe for a dueling environment.
Important Note: The flat blades will only work with the Knuckles, xpBoost, Power Up, and BonusXP emitters. If you have any other saber the flat blades WILL NOT WORK.
-
Flat Blade Black
$99.00With the excitement around Star Wars Visions and the anticipated problems around international shipping towards the end of the year, we are offering a very special pre-order for our new flat blades. This order will be just the blades without crackle details. This focuses all light to the edges of the blade to give a more pronounced halo to the blade.
The blades are made out of a special mixed polycarbonate clear plastic. They have tremendous strength and are resilient to contact. Despite the blade durability, we do not recommend these for heavy dueling. The way that the blades connect to the adaptor and then insert into the handle is not suitably safe for a dueling environment.
Important Note: The flat blades will only work with the Knuckles, xpBoost, Power Up, and BonusXP emitters. If you have any other saber the flat blades WILL NOT WORK.
